Prestige Doors
Flush Doors
“Prestige”flush doors are manufactured from a composite construction of Solid Timber components which consist of a block board core of wood strips laid edge to edge and bonded with cross bands with the latest technology. It is made of a single select hardwood species and bonded with Boiling Water Proof synthetic Phenol Formaldehyde (PF) adhesive. Its hardwood frames provide strength for fitting of hinges. The flush doors are chemically treated and processed from kiln seasoned wood and are guaranteed against warping,bulging, shrinkage, brittleness and cracks.
| Thickness (mm) | 25 | 30 | 32 | 35 | 40 |
Construction
- Core: The solid blockboard core of Prestige Flush Doors is made out of well-seasoned hardwood.
- Cross band: are from B.W.P grade Veneers.
- Face Veneers: Thicker face veneers are used to get more strength and rigidity.
(a) Gurjan faced
(b) O.S. Teak faced: We manufacture one-side Teak faced Flush Doors
(c) B.S. Teak faced: We also manufacture both sides Teak faced Flush Doors. - Frame and lipping: All battens used for frames and lipping are from well-seasoned hardwood.
- Single-leaf/double leaf: Prestige Flush Doors are supplied either as single leaf or double leaves. The rebate cutting is either splayed type or square type.
- Openings: Prestige Flush Doors are also supplied with openings for vision panels or louvers, rectangular or circular as required.
Special features
- Seasoned hardwood, Phenol formaldehyde resin, and hot press process make PRESTIGE FLUSH DOORS ware-proof, weatherproof, and free from delamination and warping.
- The same features make them dimensionally stable and extremely durable
- Eco-friendly chemical treatment of timber makes Prestige Flush Doors resistant to TERMITES, FUNGUS, and ROT.
- Prestige Flush Doors have excellent insulating properties. They keep out heat and deaden sound effectively so that when used in an auditorium they improve its acoustics.
- Being extremely strong, they make every house or flat safe.
Guarantee
Prestige Flush doors are manufactured with excellent quality raw materials. Regular tests are being carried out from our well-equipped laboratory to give constant quality. Strict inspection is carried out before and after manufacturing to ensure quality.
Should, however, any manufacturing defect become apparent in our products we undertake to replace the defective materials free of cost.
| Test Prescribed in IS: 2202-1999 | minimum Value for Conformity | Observed Value |
| General Fitness Test as per IS:4020 (Part 3), 1998 | Squareness measured | Confirmed |
| Local Planeness Test as per IS:4020 (Part 4), 1998 | Planeness measured to ah accuracy of 0.1 m | Confirmed |
| Dimension and Squareness Test as per IS: 4020 (Part 2), 1998 | Height and Width measured within an accuracy of 1.0 mm | Confirmed |
| Impact indentation Test as per IS: 4020 (Part 5), 1998 | Indentation Measured to an accuracy of 0.1 mm | Confirmed |
| Edge Loading Test as per IS: 4020 (Part 7), 1998 | The deflection measured to an accuracy of 0.1 mm | Confirmed |
| Flexure Test as per IS: 4020 (Part 6), 1998 | The deflection measured to an accuracy of 0.1 mm | Confirmed |
| Slamming Test as per IS: 4020 (Part 10), 1998 | 50 times on the nail at the rate of 4-5 drop/min | Confirmed |
| Buckling Test as per IS: 4020 (Part 9), 1998 | Deformation measured to an accuracy of 1mm, 5 min. after application of the load and 15 min. after unloading | Confirmed |
| Shock Resistance Test as per IS: 4020 (Part 8), 1998 | 4 to 5 shocks minimum | Confirmed |
| Misuse Test as per IS: 4020 (Part 11), 1998 | Should pass after applying 200N force to the handle at right angles | Confirmed |
| End Immersion Test as per IS: 4020 (Part 13), 1998 | No de-lamination | No de-lamination found |
| Varying Humidity Test as per IS: 4020 (Part 12), 1998 | Deviation measures to an accuracy of 1.0 mm | Confirmed |
| Knief Test as per IS: 4020 (Part 14) 1998 | Minimum Pass Standard | Excellent Standard |
| Screw Withdraw as per IS: 4020 (Part 16), 1998 | Applied load should be 2.0 mm per min for complete withdrawal of the screw | Confirmed |
| Glue Adhesive Test as per IS: 4020 (Part 15), 1998 | There shall be no de-lamination | No de-lamination found |
Moulded Panel Skin Doors
“Prestige” Moulded Panel Skin Doors are manufactured using Imported High Quality High Density Fibre (HDF) skins. Our major collaboration with all leading branded skin manufacturers in the world gives you access to the entire original collection available in the variety of styles, finishes and textures. These moulded skin doors offers superior design, comprehensive workmanship and highly durable quality. We use only 100% borer resistant,Vaccum Pressure Treated (VPT) finger jointed frames in the production process which is a highlighting feature of these skin doors. Various designs on other HDF skins are also available on request.
PVC Moulded Membrane Doors
“Prestige” PVC Moulded Membrane Doors are manufactured from Routered Solid Flush doors (Double Core) and cladded with Imported Rigid PVC Membrane Film of varying designer shades. These doors are zero maintenance doors and are ready-to-use the door with no additional polishing or varnishing or painting required Also comes with a choice to have PVC laminated on both sides of the panel or a single side as per requirement.
Standard Thickness (in mm)
25 , 30 , 35 , 40
Standard length (in Inch)
78 , 81 , 84 & Customized Sizes
Standard width (in Inch)
27 , 30 , 33 , 38 , 40