Manufacturer's of Plywoods, Block Boards, Finger Jointed Solid Wood & Flush Doors.
  • Club 100% Gurjan
    marine plywood
  • BWP grade
  • BWR grade
    Marine plywood
  • Checkered
  • Film Faced
  • Flexi
  • MR grade

Prestige Plywood is a premium Boiling Water proof Plywood from the house of Prestige Ply. its made of 100% Gurjan species and bonded with an unextended phenol formaldehyde resin.
Manufactured with the revolutionary GLP technology, Its 100% borer and termite proof. Prestige Club has no core gaps, besides having a higher face thickness.
The veneer has been fully treated with preservatives using organic chemicals. it is also glue line protected with organic chemicals. Besides having face thickness, all veneer layers have a uniform thickness construction with a density of 810kg/m3. it is 100% borer and termite proof and comes with a lifetime replacement guarantee.
It has many advantages over regular plywood and lends itself to diverse applications.


    it can be used for all interior, exterior & structural applications

Salient Features
  • Zero core gap / overlaps
  • No bending / warping
  • No thickness variation
  • Manifactured using hydraulic treatment & pre-press technology
  • Calibrated products
  • 100% waterproof products
  • Termite / borer proof
  • Strong nail holding ability
  • Dimensionally stable
  • Extremely versatile
Standard Thickness (in mm)

244 x 122, 214 x 122, 184 x 122, 154 x 122, 244 x 92, 214 x 92, 184 x 92, 154 x 92

Standard Size (in cm)

244 x 122, 214 x 122, 184 x 122, 154 x 122, 244 x 92, 214 x 92, 184 x 92, 154 x 92

Technical & ISI Specifications of Various Panel Products
SI.No  Parameters Minimum Value
 1 Moisture Content(%)

Glue Shear Strength (kg)

Water Resistance test (kg)
 8 - 10%


>120  (tested after 72 hrs boiling)

Mycological test (kg)

Adhesion of plies

Preservative Treatment (kg/cm2)


 3 Modulus of Elasticity kg (N/mm2)

Across face grain

Along face grain

Modulus of Rupture (N/mm2)



 4 Across the grain

Along the grain

Specific gravity (gms/cc)

Tensile Strength (gm/cm2)


0.70 to 0.75

 5 Comprehesive Strength

Water Absorption

< 5%
 6 Screw holding strength (kg)

Nail holding Strength (kg)


Is made from well selected veneers hardwood and is bonded with extended superior quality Phenol Formaldehyde Synthetic resin under high temperature and pressure. This given extra bonding strength and rigidity. It is further treated with chemicals by impregnation process to give resistance to fungus inspect and termite etc.

Prestige Plywood is an ideal product where strength, toughness, durability, dimensional stability and elegance are assembled hand in hand. Prestige products are certified by Indian Standard Institute (ISI) and Our is an ISO 9001 company.

Salient Features
  • Specially designed and engineered.
  • 100% selected wood is used.
  • 100% powder proof, waterproof and hot prof.
  • Holds paints and varnishes well through a life time.
  • Does not twist, warp or delaminate.
  • Can withstand 72 hours boiling test.
  • Treated with special preservatives.
  • Durable in fresh water,sea water, ice or snow.
  • Can withstand any extreme cyclic change.
  • Marketed after server laboratory tests.
Technical Specification
 Properties  Unit  IS: 303 - 1989  Tested

 Shear strength in dry test  Average minimum
 Individual minimum

 Water resistant
 Share strength
 (After 72 hrs. boiling)
 Average minimum
 Individual minimum



 Moisture content


 5 - 15

  7 - 9

Standard Size (in cm)

244 x 122, 214 x 122, 184 x 122, 154 x 122, 244 x 92, 214 x 92,184 x 92, 154 x 92

Standard Thickness (in mm)

4, 6, 9, 12, 16 & 19

Prestige Plywood is constructed with high quality veneers of uniform thickness which are bonded with carefully prepared Phenol Formaldehyde synthetic resin (PF) which gives bonding to plywood.

They are manufactured from solid wood core and veneer of sorted out timber which is seasoned under accurate temperature required. Plywood can be successfully used under the severest of tropical climate conditions.

It is formed by resin which on being poisoned by specific chemical makes it termite resistant and after glue poisoning it is dipped in the preservative

  • Maintenance and repairing of marine and river crafts.
  • Interior of shops and lines.
  • Heat exchangers.
  • Cooling towers.
  • Public hoardings, sign boards, display-boards etc.
  • Tanks for liquid chemicals
  • Portable cabins and shelters that are exposed to serve conditions
  • Structural applications.
Standard Thickness (in mm)

4, 6, 9, 12, 16, & 19

Standard Size (in cm)

244 x 122, 214 x 122, 184 x 122, 154 x 122, 244 x 92, 214 x 92, 184 x 92, 154 x 92

Technical Specification
 SI.No  Test prescribed in IS : 710 -  1976  Minimum Value for Conformity  Observed Value
 1  Moisture Content Test  Not less then 5%
 Not more than 15%


 Glue adhesion Strength in dry  state
 1) Glue Shear Strength
 2) Adhesion of plies(Knife test)

 Avg. 1323.9.N
 Min. Ind. 1078.7N
 Minimum  Pass Standard
 2050 N
 1800 N
 Pass Standard
 Resistance to water
 ( After 72 hour boiling) N
 i) Glue Shear Strength

 2) Adhesion of Plies  (Knife test)

 Avg. 980.7 N
 Min. Ind.784.5 N
 Minimum Pass Standard


 1380 N
 900 N
 Pass Standard

 Resistance to microorganisms, N
 i) Glue Share Strength

 ii) Adhesion of Plies(Knife test)

 Avg. 980.7 N
 Min. Ind.784.7N
 Minimum Pass Standard

 1590 N
 1250 N
 Pass Standard

 5  Tensile strength, N /mm2
 i) Parallel to the face grain
 ii) Perpendicular to the face grin
 iii) Sum of the tensile Strengths
 (i + ii)
 Min. 41.10

 Retention of preservative
 Chemicals,Kg / m3


 46.94 Copper as  CuSO4 H2 O:13.5
 Chromium as

A Prestige product having high density and strength, by pressing with higher specific pressure and temperature from our most modern hydraulic press. It has outstanding properties for superior applications. The resin and veneers used for checkered plywood is of superior keep off any out side attack by termite, fungus, rat any other insects.

Techical Report (12 mm thickness basis)
  • Tensile strength along the grain
    800 kgs/cm
  • Bending Strength across the grain
  • Impact strength across the grain
    25 kgs/cm
  • Thickness swelling in boiling water across the grain
  • Thickness swelling in immersed condition
  • Density swelling in immersed condition
    0.95 to 1.23 gm/cc
  • Percentage moisture swelling in immersed condition

Bus and Railway coach flooring, Flooring of containers, Site-fabricated houses, Interior decoration.

Salient Features
  • Anti – skid surface
  • Anti – fire properties
  • Excellent electrical insulation
  • Superior Sound absorption
  • As flooring panel, no pre-pest treatment required
  • Free from biodegradation
  • Standard thicknesses (mm)
  • Standard size (Feet)

Prestige Film faced plywood is jointed with glue. It is specially covered on both sides by phenolic foil and its edges are painted with protective water- resistant coating. Film faced plywood are mainly used in concrete shuttering form, building materials, for making high quality furniture and so on.

Prestige Film Faced Plywood is Poplar, Birch or Combi plywood coated on both sides with a smooth hard wearing phenolic film overlay.

Prestige Film Faced Plywood features smooth, maintenance free surface easy to keep clean ready for use high load bearing capacity

Prestige Flexi Ply is the first choice for all imaginative ideas with bends and curves. It is flexible plywood to meet all the curvaceous requirements. Usually, it bends at a certain radius and is very friendly to use. Carpenters can curve and bend Prestige Flexi Ply with ease without the use of any specialized tool.

It is especially useful for covering rounded pillars, beams and making of designer front desks, racks in retail showrooms etc. Now-a-days, designers are not able to think of woodworking without the presence of Flexi Ply.

MR grade plywood means Moisture Resistant in India, it is also Know as Commercial grade plywood.
MR Grade Plywood is made of high quality hardwood and is amongst the best in the country. Both the inner core and the outer surfaces are made from superior quality wood and bonded with UREA Formaldehyde Resin.
The most common use of MR plywood is for making home and office furniture.
The Indian Standards specification number for MR grade plywood is IS:303.
It is an Interior grade plywood, suitable for indoor use.
Provided plywod are available in different size and finishes to fulfill the exact demands of the clients. These plywood boards are made of high grade wood to ensure high tolerance of the products by our team of experts as per the market standards

Technical Specification (IS:303)
 SI.No  Test  ISI Requirement  Observed Value
 1  Moisture Content  5% - 15%  8%
   Dimension  Length+5mm
Width+2mm Thickness >6mm- + 5%, < 6mm - + 10%
 Within limit
 2  Sp. Gravity   >7
 3  Resistance to water
 ( 3 cycles of 8 hr Boiling & 16 Hr Drying at 650C ) - Adhesion to piles
 Min. Pass Standard  Excellent

 Resistance to Micor-organism - Adhesion to piles

  Min. Pass Standard   Excellents
 5  Static Bending Test    
 a  Modulus of elasticity

-along the grain Avg.

-Across the grain Avg.

 Min. 5000 N/

 Min. 2500 N/

 6500 N/

 3000 N/
 b  Modulus of Rupture

-along the grain Avg.

-Across the grain Avg.

 Min. 40 N/

 Min. 20 N/

 56 N/

 30 N/

Standard Size (ft)

8 x 4, 8 x 3, 7 x 4, 7 x 3, 6 x 4, 6 x 3

Standard Thickness (in mm)

4, 6, 8, 12, 15, 18

  • Finger Jointed
    Solid Wood
  • Prestige
    Block Board
  • Prestige
    Ply woods
  • Prestige
Our products are 100% treated with preservative chemicals